Fan powered supply air valve
A fan powered supply air valve for buildings with either natural or mechanical ventilation. The valve filters and heats the fresh air blown into the room.
Bag filter included in the package; installed inside of the fresh air duct.
1.0 W fan mixes the incoming fresh supply air with the warm air inside.
Mobair 2030S is a completely new concept for bringing the supply air into the room. The unique feature is heating of the incoming air with the warm air sediment at the ceiling. The valve has a 1.0 W fan which makes the power consumption very low. The patented grille brings in the supply air without draft.
Mobair 2030S is easy to install and to maintain. The installation frame, fixing screws, replaceable filter, outdoor grille and the incoming air tube are all included.
- Product code: M2030S
- LVI-number: 7929033
- Total Air flow: 20 dm³/s, excluding circulating air: 6-12 dm³/s
- Energy consumption: 1.0 W
- Bag filter (M5) installed inside the air duct
- Plug adapter, 8.5 V DC / 8 meter power cord
Supply air valves are required to bring supply air into the house or a building. For a normal bedroom the amount of supply air required for two people is 2 x 20 m³/h or 40 m³/h. During cold and freezing temperatures the air volume can be reduced by about 40%. Even during the cold winter times, the Mobair supply air valves can bring the supply air inside without the feeling of draft, with good filtration and very low energy consumption.
Supply air valves are placed primarily in the bedrooms. It is also advisable to place a supply air valve in the living room especially if there is a fireplace. Energy consumption can be minimized when the supply air valve is kept operational only when the room is occupied.